Modulift has manufactured its largest ever spreader beam that can lift a staggering 1,500 tonnes at a span of 20m. The feat of below-the-hook engineering was delivered to Holland-based Safe Lifting Europe B.V, a sister company of Euro Rope Nederland B.V. and an equipment / service provider to the marine industry, at the end of last year.

The MOD 800X/1500 has 1,000 tonne / 800 tonne, top / bottom wide body shackles at each end and is the second 1,000 tonne+ spreader beam Modulift has manufactured in less than three months, as the super heavy lift sector continues to demand higher capacity equipment.

The latest beam received DNV Design Approval and DNV GL CG3 certification; the latter certifies that DNV carried out a full survey during the manufacturing and testing process, as well as approving the design. The beam took eight weeks to manufacture and test in a purpose-built compression test rig. The rig had to be upgraded so Modulift could apply a proof load of 1,650 tonne (working load limit [WLL] x 1.1) to the spreader beam.

The 800X/1500 was tested in a purpose-built compression test rig that had to be upgraded to apply a proof load of 1,650 tonnes (working load limit [WLL] x 1.1) to the spreader beam.

Spencer explained that this particular customer observes that marine influencers are increasingly looking for modular solutions to upscale lifting activities on topsides, in particular to avoid limitations associated with fixed systems. She also anticipates that the 800X/1500 beam will not be the company’s largest spreader for long, with the market showing an insatiable appetite to continue to upscale lifting capacities.

Sarah Spivey, managing director at Modulift, said: “Satisfying though it’s been to process these recent orders, we are not surprised. We have been aware of the potential at the super heavy end of the market for a long time—the middle remains quiet—and, like Sue, I don’t expect this to be our highest capacity beam for the long term. We have the engineering capability to go to 5,000 tonnes and the boundaries will continue to be pushed.”

Painted 800X/1500 6m struts ready for packing and delivery.

Further testimony to the potential of the marketplace is the fact that the hulking beam was not acquired for one standout job, but for repeated use alongside other Modulift equipment, ranging from MOD 110 to MOD 600XB/800. Winches, spoolers, water bags, load cells, shackles and other rigging equipment are also widely utilised by its customer base.

Jacques Vroegop, technical director at Safe Lifting Europe, who took delivery of the 800X/1500 spreader beam, said: “We are working in a market that is showing unlimited potential in terms of capacity; we could be talking about much heavier lifts becoming commonplace. At the moment we are working with cranes offering up to 1,000 tonne capacity but we are in a very dynamic sector.”